note: all specifications are subject to change without notification. scd's for these devices should be reviewed by ssdi prior to release. data sheet #: rsed15c doc solid state devices, inc. 14701 firestone blvd * la mirada, ca 90638-5223 phone: (562) 404-4474 * fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com designer?s data sheet part number / ordering in f ormation 1 / sed150 _ _ _ _ _ _ = not screened tx = tx level txv = txv s = s level 30 = 30 v lb = sedpack 3 le = sedpack 3 with lead lt = sedpack 3 with lead and heatsink sed150lb30, sed150le30, and sed150lt30 150 a / 30 v schottky rectifier features: ? 30 volt schottky rectifier ? average output current 150 amps ? low reverse leakage ? low forward voltage drop ? hermetically sealed power surface mount package ? guard ring for overvoltage protection ? eutectic die attach ? tx, txv, and space level screening available 2 / . consult factory. maximum ratings 3/ symbol value units peak repetitive reverse and dc blocking voltage v rrm v rwm v r 30 volts average rectified forward curren t (resistive load, 60 hz, sine wave, t c = 100 o c) i o 150 amps peak surge curren t (8.3 ms pulse, half sine wave superimposed on io, allow junction to reach equilibrium between pulses, t a = 25 o c) i fsm 1000 amps operating & storage temperature t op & t stg -55 to +150 o c maximum thermal resistance (junction to case) r jc 0.3 o c/w sedpack 3 (lb) sedpack 3 with lead (le) sedpack 3 with lead and heatsink (lt) notes: 1 / for ordering information, price, and availability contact factory. 2 / screened to mil-prf-19500. 3 / unless otherwise specified, all electrical characteristics @25oc.
note: all specifications are subject to change without notification. scd's for these devices should be reviewed by ssdi prior to release. data sheet #: rsed15c doc electrical characteristics 3 / symbol maximum value units instantaneous forward voltage drop (t a =25oc, 300-500 sec pulse) i f = 50 a i f = 110 a i f = 150 a v f1 v f2 v f3 0.46 0.55 0.65 v dc instantaneous forward voltage drop (300-500 sec pulse) t a = 125oc, i f = 150 a v f4 0.60 v dc reverse leakage curren t (rated v r , t a = 25oc, 300 sec pulse minimum) i r1 7.5 ma reverse leakage curren t (rated v r , t a = 125oc, 300 sec pulse minimum) i r2 750 ma junction capacitance (v r = 5v, f = 1mhz, t a = 25 o c) c j 7000 pf notes: 1 / for ordering information, price, and availability contact factory. 2 / screened to mil-prf-19500. 3 / unless otherwise specified, all electrical characteristics @25oc. pin assignment package top bottom lead sedpack 3 (lb) anode cat hode --- sedpack 3 with lead (le) anode cathode anode sedpack 3 with lead (lt) anode cathode anode case outline: sedpack 3 case outline: sedpack 3 with lead case outline: sedpack 3 with lead and heatsink solid state devices, inc. 14701 firestone blvd * la mirada, ca 90638-5223 phone: (562) 404-4474 * fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com sed150lb30, sed150le30, and sed150lt30
|
